Español
Português
BIT EPO is the new 1:1 Pure Epoxy which packs some respectable load figures and a European Approval for Post Installed Rebar and very well suited to high volume fixings.
A two component chemical anchoring injection system in 1:1 ratio. A formulation derived from pure epoxy with very high bond strength, developed principally to anchor threaded rods and rebar into concrete.
CHARACTERISTICS:
• Suitable for high loads featuring large diameters and deep embedments.
• Longer working times for large holes, and high temperatures.
• No shrinkage, good for large diameter fixings.
• Use in wet or flooded environments and fixing holes, or underwater.
• High durability, resistance to chemicals.
• Used for diamond drilled holes.
• Solvent frree resin.
• Fixings in concrete, wood, or other high strength materials.
APPROVALS / REPORTS:
• ETA TR023 Post Installed Rebar Installations.
• CE Certified 1404-CPR-0000 ZAG
• R240 Fire Test Report SIGGMA
• LEED tested 2009 EQ c4.1 SCAQMD rule 1168 (2005.)
• VOC A+ Rating (Volatile Organic Content)
AVAILABILITY:
• 400 ml | 600 ml.
